On this page, you can download HyperOS 2 (OS2.0.114.0.VOLCNXM) flash file for Redmi Turbo 4 Pro (China) based on Android 15 version.
The Redmi Turbo 4 Pro (Codenamed: onyx) HyperOS OS2.0.114.0.VOLCNXM for China is available as:
- Full Recovery ROM – Full ROM package for installs via Recovery.
- Full Fastboot ROM – Full ROM package for clean installs.
Follow the detailed tutorial on how to install HyperOS OS2.0.114.0.VOLCNXM on Redmi Turbo 4 Pro (China) from here – Fastboot ROM | Recovery ROM.
Disclaimer
Flashing is a tedious process and should be carried out carefully; otherwise, it may permanently damage your device. XiaomiAdvices.com or Xiaomi is not responsible for any damage that may be caused to your device while flashing. Proceed at your own risk.
Redmi Turbo 4 Pro HyperOS OS2.0.114.0.VOLCNXM China Stable Recovery ROM
| RECOVERY ROM | |
|---|---|
| File Name | onyx-ota_full-OS2.0.114.0.VOLCNXM-user-15.0-4ff83d67a1.zip |
| Device | Redmi Turbo 4 Pro |
| Codename | onyx |
| HyperOS Version | OS2.0.114.0.VOLCNXM |
| Android | 15.0 |
| Branch | Stable |
| Region | China |
| Type | Full |
| Size | 7.8 GB |
| Date | 2025-04-24 |
| MD5 | 4ff83d67a1284d3c03e48cb885c8667a |
Redmi Turbo 4 Pro HyperOS OS2.0.114.0.VOLCNXM China Stable Fastboot ROM
| FASTBOOT ROM | |
|---|---|
| File Name | onyx_images_OS2.0.114.0.VOLCNXM_20250419.0000.00_15.0_cn_a71f1bc559.tgz |
| Device | Redmi Turbo 4 Pro |
| Codename | onyx |
| HyperOS Version | OS2.0.114.0.VOLCNXM |
| Android | 15.0 |
| Branch | Stable |
| Region | China |
| Type | Full |
| Size | 487 Bytes |
| Date | 2025-04-19 |
| MD5 | a71f1bc559f8606f4feec6c11f0648b6 |
How to Flash HyperOS OS2.0.114.0.VOLCNXM Fastboot ROM on Redmi Turbo 4 Pro (China)
- Download and extract the Redmi Turbo 4 Pro HyperOS OS2.0.114.0.VOLCNXM Fastboot ROM on your computer. Make sure to check if the ROM file suffix is “.tgz“. If it is “.gz“, please rename it to “.tgz“.
- Download and extract MiFlash Tool on your computer.
- Make sure your Redmi Turbo 4 Pro’s bootloader is unlocked.
- Power off and boot Redmi Turbo 4 Pro (China) into Fastboot Mode by pressing the Volume Down and Power buttons together until you see the Fastboot logo.
- Connect your device to computer using USB Cable.
- Run XiaoMiFlash.exe and select the HyperOS OS2.0.114.0.VOLCNXM Fastboot ROM folder.
- Click on refresh to detect your device and click on flash to start the flashing process.
Follow the detailed guide on how to flash HyperOS OS2.0.114.0.VOLCNXM Fastboot ROM on Xiaomi, Redmi and POCO devices here.
How to Install HyperOS OS2.0.114.0.VOLCNXM Recovery ROM on Redmi Turbo 4 Pro (onyx) via Stock Recovery
We can update the Redmi Turbo 4 Pro (China) firmware via recovery without using computer. However, the Recovery ROM HyperOS version must be higher than your current installed version, as downgrading firmware is blocked by Xiaomi.
While user data is retained when flashing via stock recovery, it’s recommended to backup your Redmi Turbo 4 Pro (China) data before installing, in case of accidental data loss.
Follow the steps to install HyperOS OS2.0.114.0.VOLCNXM Recovery ROM on Redmi Turbo 4 Pro using stock recovery:
- Download the Redmi Turbo 4 Pro HyperOS OS2.0.114.0.VOLCNXM Recovery ROM zip for China region.
- Rename the zip file to “update.zip” if the name differs.
- Transfer the update.zip to the root of your phone’s internal storage.
- Press and hold the Volume Up and Power buttons together to boot into recovery mode. For some devices you’ll have to press Volume Up, Volume Down and Power buttons to boot into recovery mode.
- The update will automatically start flashing if the correct ROM zip is detected.
- Once firmware installation completes, your phone will reboot into the updated HyperOS OS2.0.114.0.VOLCNXM version. User data and apps are retained after the process.
For older Xiaomi phones, you may need to manually select “Install update.zip to System One” from the Recovery menu. After install, exit Recovery and boot into HyperOS.
Install HyperOS Recovery ROM on Redmi Turbo 4 Pro via Software Updater using PC
You can install HyperOS OS2.0.114.0.VOLCNXM firmware updates on your Redmi Turbo 4 Pro device using a Windows PC, without needing to unlock the bootloader. This method suits for the situations like: Updating Global Stable ROM from Global Stable ROM, Updating Global Beta ROM from Global Beta ROM, Updating to Global Beta ROM from Global Stable ROM and vice versa.
Follow these steps to flash Recovery ROM on Redmi Turbo 4 Pro (China) using a PC:
- Download the latest Redmi Turbo 4 Pro (China) HyperOS OS2.0.114.0.VOLCNXM Recovery ROM zip.
- Connect your phone to the PC using a USB cable.
- Copy the downloaded ROM zip file to the internal storage on your device, in the “downloaded_rom” folder. If the folder doesn’t exists create it before copying the ROM file.
- On the phone, open Settings and go to About Phone → System Update.
- Tap the 3-dot menu (⋮) in the top right and select “Select update package” or “Choose update package“.
- Choose the Recovery ROM zip file you copied to the phone’s storage.
- Once you select the ROM file, the update process will start automatically and install the new HyperOS firmware version.
This method lets you update HyperOS using PC without needing to unlock bootloader or wipe data.
Follow the detailed guide on how to flash HyperOS OS2.0.114.0.VOLCNXM Recovery ROM on Xiaomi, Redmi and POCO devices here.