Download Mi 11 EEA HyperOS OS1.0.9.0.UKBEUXM Recovery ROM

On this page, you can download HyperOS 1 (OS1.0.9.0.UKBEUXM) flash file for Mi 11 (EEA) based on Android 14 version.

The Mi 11 (Codenamed: venus) HyperOS OS1.0.9.0.UKBEUXM for EEA is available as:

• Full Recovery ROM – Full ROM package for installs via Recovery.
• Incremental Update (Recovery ROM) – Incremental MIUI OS1.0.9.0.UKBEUXM OTA update.

Follow the detailed tutorial on how to install HyperOS OS1.0.9.0.UKBEUXM on Mi 11 (EEA) from here – Recovery ROM | Incremental Update.

Disclaimer

Flashing is a tedious process and should be carried out carefully; otherwise, it may permanently damage your device. XiaomiAdvices.com or Xiaomi is not responsible for any damage that may be caused to your device while flashing. Proceed at your own risk.

Mi 11 HyperOS OS1.0.9.0.UKBEUXM EEA Stable Beta Recovery ROM

Mi 11 HyperOS OS1.0.9.0.UKBEUXM EEA Stable Beta Incremental Update Recovery ROM

How to Install HyperOS OS1.0.9.0.UKBEUXM Recovery ROM on Mi 11 (venus) via Stock Recovery

We can update the Mi 11 (EEA) firmware via recovery without using computer. However, the Recovery ROM HyperOS version must be higher than your current installed version, as downgrading firmware is blocked by Xiaomi.

While user data is retained when flashing via stock recovery, it’s recommended to backup your Mi 11 (EEA) data before installing, in case of accidental data loss.

Follow the steps to install HyperOS OS1.0.9.0.UKBEUXM Recovery ROM on Mi 11 using stock recovery:

1. Download the Mi 11 HyperOS OS1.0.9.0.UKBEUXM Recovery ROM zip for EEA region.
2. Rename the zip file to “update.zip” if the name differs.
3. Transfer the update.zip to the root of your phone’s internal storage.
4. Press and hold the Volume Up and Power buttons together to boot into recovery mode. For some devices you’ll have to press Volume Up, Volume Down and Power buttons to boot into recovery mode.
5. The update will automatically start flashing if the correct ROM zip is detected.
6. Once firmware installation completes, your phone will reboot into the updated HyperOS OS1.0.9.0.UKBEUXM version. User data and apps are retained after the process.

For older Xiaomi phones, you may need to manually select “Install update.zip to System One” from the Recovery menu. After install, exit Recovery and boot into HyperOS.

Install HyperOS Recovery ROM on Mi 11 via Software Updater using PC

You can install HyperOS OS1.0.9.0.UKBEUXM firmware updates on your Mi 11 device using a Windows PC, without needing to unlock the bootloader. This method suits for the situations like: Updating Global Stable ROM from Global Stable ROM, Updating Global Beta ROM from Global Beta ROM, Updating to Global Beta ROM from Global Stable ROM and vice versa.

Follow these steps to flash Recovery ROM on Mi 11 (EEA) using a PC:

1. Download the latest Mi 11 (EEA) HyperOS OS1.0.9.0.UKBEUXM Recovery ROM zip.
2. Connect your phone to the PC using a USB cable.
3. Copy the downloaded ROM zip file to the internal storage on your device, in the “downloaded_rom” folder. If the folder doesn’t exists create it before copying the ROM file.
4. On the phone, open Settings and go to About Phone → System Update.
5. Tap the 3-dot menu (⋮) in the top right and select “Select update package” or “Choose update package“.
6. Choose the Recovery ROM zip file you copied to the phone’s storage.
7. Once you select the ROM file, the update process will start automatically and install the new HyperOS firmware version.

This method lets you update HyperOS using PC without needing to unlock bootloader or wipe data.

Follow the detailed guide on how to flash HyperOS OS1.0.9.0.UKBEUXM Recovery ROM on Xiaomi, Redmi and POCO devices here.