On this page, you can download MIUI 12 (V12.5.8.0.RJGEUXM) flash file for POCO X3 NFC (EEA) based on Android 11 version.
The POCO X3 NFC (Codenamed: surya) MIUI V12.5.8.0.RJGEUXM for EEA is available as:
- Full Recovery ROM – Full ROM package for installs via Recovery.
- Incremental Update (Recovery ROM) – Incremental MIUI V12.5.8.0.RJGEUXM OTA update.
- Full Fastboot ROM – Full ROM package for clean installs.
Follow the detailed tutorial on how to install MIUI V12.5.8.0.RJGEUXM on POCO X3 NFC (EEA) from here – Fastboot ROM | Recovery ROM | Incremental Update.
Disclaimer
Flashing is a tedious process and should be carried out carefully; otherwise, it may permanently damage your device. XiaomiAdvices.com or Xiaomi is not responsible for any damage that may be caused to your device while flashing. Proceed at your own risk.
POCO X3 NFC MIUI V12.5.8.0.RJGEUXM EEA Stable Recovery ROM
| RECOVERY ROM | |
|---|---|
| File Name | miui_SURYAEEAGlobal_V12.5.8.0.RJGEUXM_953ee13fb5_11.0.zip |
| Device | POCO X3 NFC |
| Codename | surya |
| MIUI Version | V12.5.8.0.RJGEUXM |
| Android | 11.0 |
| Branch | Stable |
| Region | EEA |
| Type | Full |
| Size | 2.7 GB |
| Date | 2022-06-08 |
| MD5 | 953ee13fb5eee58e48a084fa14795332 |
POCO X3 NFC MIUI V12.5.8.0.RJGEUXM EEA Stable Incremental Update Recovery ROM
| INCREMENTAL UPDATE | |
|---|---|
| File Name | miui-blockota-surya_eea_global-V12.5.7.0.RJGEUXM-V12.5.8.0.RJGEUXM-df64645d11-11.0.zip |
| Device | POCO X3 NFC |
| Codename | surya |
| MIUI Version | V12.5.8.0.RJGEUXM |
| Android | 11.0 |
| Branch | Stable |
| Region | EEA |
| Type | Incremental |
| Size | 2.7 GB |
| Date | 2022-06-08 |
POCO X3 NFC MIUI V12.5.8.0.RJGEUXM EEA Stable Fastboot ROM
| FASTBOOT ROM | |
|---|---|
| File Name | surya_eea_global_images_V12.5.8.0.RJGEUXM_20220530.0000.00_11.0_eea_d1aed3c85f.tgz |
| Device | POCO X3 NFC |
| Codename | surya |
| MIUI Version | V12.5.8.0.RJGEUXM |
| Android | 11.0 |
| Branch | Stable |
| Region | EEA |
| Type | Full |
| Size | 4.9 GB |
| Date | 2022-05-30 |
| MD5 | d1aed3c85f75a4d0a31c6c7d3a999fd9 |
How to Flash MIUI V12.5.8.0.RJGEUXM Fastboot ROM on POCO X3 NFC (EEA)
- Download and extract the POCO X3 NFC MIUI V12.5.8.0.RJGEUXM Fastboot ROM on your computer. Make sure to check if the ROM file suffix is “.tgz“. If it is “.gz“, please rename it to “.tgz“.
- Download and extract Xiaomi Firmware Flashing Tool on your computer.
- Make sure your POCO X3 NFC’s bootloader is unlocked.
- Power off and boot POCO X3 NFC (EEA) into Fastboot Mode by pressing the Volume Down and Power buttons together until you see the Fastboot logo.
- Connect your device to computer using USB Cable.
- Run XiaoMiFlash.exe and select the MIUI V12.5.8.0.RJGEUXM Fastboot ROM folder.
- Click on refresh to detect your device and click on flash to start the flashing process.
Follow the detailed guide on how to flash MIUI V12.5.8.0.RJGEUXM Fastboot ROM on Xiaomi, Redmi and POCO devices here.
How to Install MIUI V12.5.8.0.RJGEUXM Recovery ROM on POCO X3 NFC (surya) via Stock Recovery
We can update the POCO X3 NFC (EEA) firmware via recovery without using computer. However, the Recovery ROM MIUI version must be higher than your current installed version, as downgrading firmware is blocked by Xiaomi.
While user data is retained when flashing via stock recovery, it’s recommended to backup your POCO X3 NFC (EEA) data before installing, in case of accidental data loss.
Follow the steps to install MIUI V12.5.8.0.RJGEUXM Recovery ROM on POCO X3 NFC using stock recovery:
- Download the POCO X3 NFC MIUI V12.5.8.0.RJGEUXM Recovery ROM zip for EEA region.
- Rename the zip file to “update.zip” if the name differs.
- Transfer the update.zip to the root of your phone’s internal storage.
- Press and hold the Volume Up and Power buttons together to boot into recovery mode. For some devices you’ll have to press Volume Up, Volume Down and Power buttons to boot into recovery mode.
- The update will automatically start flashing if the correct ROM zip is detected.
- Once firmware installation completes, your phone will reboot into the updated MIUI V12.5.8.0.RJGEUXM version. User data and apps are retained after the process.
For older Xiaomi phones, you may need to manually select “Install update.zip to System One” from the Recovery menu. After install, exit Recovery and boot into MIUI.
Install MIUI Recovery ROM on POCO X3 NFC via Software Updater using PC
You can install MIUI V12.5.8.0.RJGEUXM firmware updates on your POCO X3 NFC device using a Windows PC, without needing to unlock the bootloader. This method suits for the situations like: Updating Global Stable ROM from Global Stable ROM, Updating Global Beta ROM from Global Beta ROM, Updating to Global Beta ROM from Global Stable ROM and vice versa.
Follow these steps to flash Recovery ROM on POCO X3 NFC (EEA) using a PC:
- Download the latest POCO X3 NFC (EEA) MIUI V12.5.8.0.RJGEUXM Recovery ROM zip.
- Connect your phone to the PC using a USB cable.
- Copy the downloaded ROM zip file to the internal storage on your device, in the “downloaded_rom” folder. If the folder doesn’t exists create it before copying the ROM file.
- On the phone, open Settings and go to About Phone → System Update.
- Tap the 3-dot menu (⋮) in the top right and select “Select update package” or “Choose update package“.
- Choose the Recovery ROM zip file you copied to the phone’s storage.
- Once you select the ROM file, the update process will start automatically and install the new MIUI firmware version.
This method lets you update MIUI using PC without needing to unlock bootloader or wipe data.
Follow the detailed guide on how to flash MIUI V12.5.8.0.RJGEUXM Recovery ROM on Xiaomi, Redmi and POCO devices here.